 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| H T-1 (3 mm) High Performance TS AlGaAs Red LED Lamps Technical Data HLMP-J100 HLMP-J105 HLMP-J150 HLMP-J155 Features * High Light Output over a Wide Range of Currents (500 A to 50 mA) * Popular T-1 Package * Low Forward Voltage * Low Power Dissipation * Deep Red Color * Long Life: Solid State Reliability * Wide Viewing Angles * Available on Tape and Reel Package Dimensions 3.18 (0.125) 2.67 (0.105) 3.43 (0.135) 2.92 (0.115) 4.70 (0.185) 4.19 (0.165) 6.35 (0.250) 5.58 (0.220) 1.02 (0.040) NOM. 0.45 (0.018) SQUARE NOMINAL 25.40 (1.00) MIN. ANODE CATHODE Description The T-1 solid state lamps utilize a highly optimized LED material technology, transparent substrate aluminum gallium arsenide (TS AlGaAs). This LED technology has a very high luminous efficiency, capable of producing high light output over a wide range of drive currents (500 A to 50 mA). The color is deep red at a dominant wavelength of 644 nm. TS AlGaAs is a flip-chip LED technology, die attached to the anode lead and wire bonded to the cathode lead. Typical IV (mcd) IF = 20 mA 340 - 175 - Typical IV (mcd) IF = 0.5 mA - 6 - 3 5964-9372E Applications * Outdoor Message Boards * Automotive Lighting * Portable Equipment * Safety Lighting Equipment * Medical Equipment * Changeable Message Signs 2.54 (0.100) NOM. 1.27 (0.050) NOM. Device Selection Guide Viewing Angle 21/2 45 45 55 55 Deep Red d = 644 nm HLMP-J105 HLMP-J155 HLMP-J100 HLMP-J150 Package Description T-1 (3 mm), Untinted, Non-diffused, Standard Current T-1 (3 mm), Untinted, Non-diffused, Low Current T-1 (3 mm), Tinted, Diffused, Standard Current T-1, (3 mm), Tinted, Diffused, Low Current 1-124 Absolute Maximum Ratings Peak Forward Current[2] ............................................................ 300 mA Average Forward Current (@ IPEAK = 300 mA)[1,2] ...................... 30 mA DC Forward Current[3] ................................................................. 50 mA Power Dissipation ..................................................................... 100 mW Reverse Voltage (IR = 100 A) ......................................................... 5 V Transient Forward Current (10 s Pulse)[4] ............................... 500 mA Operating Temperature Range ........................................ -55 to +100C Storage Temperature Range ........................................... -55 to +100C LED Junction Temperature ........................................................... 110C Solder Temperature ................................................ 260C for 5 seconds [1.6 mm (0.063 in.) from body] Notes: 1. Maximum IAVG at f = 1 kHz, DF = 10%. 2. Refer to Figure 6 to establish pulsed operating conditions. 3. Derate linearly as shown in Figure 5. 4. The transient peak current is the maximum non-recurring peak current the device can withstand without damaging the LED die and wire bonds. It is not recommended that the device be operated at peak currents above the Absolute Maximum Peak Forward Current. Optical Characteristics at TA = 25C Luminous Intensity IV (mcd) @ 20 mA[1] Min. Typ. 56.4 340 35.2 175 Total Flux v (mlm) @ 20 mA[2] Typ. 280 Peak Wavelength PEAK (nm) Typ. 654 654 Color, Dominant Wavelength d[3] (nm) Typ. 644 644 Viewing Angle 21/2 (Degrees)[4] Typ. 45 55 Luminous Efficacy v (lm/w) 85 85 Part Number HLMP-J105 HLMP-J100 Optical Characteristics at TA = 25C Part Number (Low Current) HLMP-J155 HLMP-J150 Luminous Intensity IV (mcd) @ 0.5 mA[1] Min. Typ. 2.1 6.0 1.3 3.0 Total Flux v (mlm) @ 0.5 mA[2] Typ. 37.2 Peak Wavelength PEAK (nm) Typ. 654 654 Color, ZDominant Wavelength d[3] (nm) Typ. 644 644 Viewing Angle 21/2 (Degrees)[4] Typ. 45 55 Luminous Efficacy v (lm/w) 85 85 Notes: 1. The luminous intensity, IV, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. 2. V is total luminous flux output as measured with an integrating sphere. 3. The dominant wavelength, d, is derived from the CIE Chromaticity Diagram and represents the color of the device. 4. 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. 1-125 Electrical Characteristics at TA = 25C Forward Voltage VF (Volts) @ IF = 20 mA Typ. Max. 1.9 2.4 1.9 2.4 Reverse Breakdown VR (Volts) @ IR = 100 A Min. Typ. 5 20 5 20 Capacitance C (pF) VF = 0, f = 1 MHz Typ. 20 20 Speed of Response s (ns) Time Constant e-t/ s Typ. 45 45 Part Number HLMP-J105 HLMP-J100 Thermal Resistance RJ-PIN (C/W) 290 290 Electrical Characteristics at TA = 25C Part Number (Low Current) HLMP-J155 HLMP-J150 Forward Voltage VF (Volts) @ IF = 0.5 mA Typ. Max. 1.6 1.9 1.6 1.9 Reverse Breakdown VR (Volts) @ IR = 100 A Min. Typ. 5 20 5 20 Capacitance C (pF) VF = 0, f = 1 MHz Typ. 20 20 Speed of Response s (ns) Time Constant e-t/s Typ. 45 45 Thermal Resistance RJ-PIN (C/W) 290 290 1.0 300 200 2.4 2.0 RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) IF - FORWARD CURRENT - mA 100 50 1.0 0.5 RELATIVE INTENSITY 10-1 20 10 5 2 0.2 0.1 0.05 10-2 10-3 500 600 700 1000 1 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 VF - FORWARD VOLTAGE - V 0.01 0.5 1 2 5 10 20 50 WAVELENGTH - nm IF - DC FORWARD CURRENT - mA Figure 1. Relative Intensity vs. Wavelength. Figure 2. Forward Current vs. Forward Voltage. Figure 3. Relative Luminous Intensity vs. DC Forward Current. 1-126 1.2 IF - FORWARD CURRENT - mA 50 IAVG = AVERAGE FORWARD CURRENT - mA 50 f > 1000 Hz 40 f > 300 Hz 30 f > 100 Hz 20 1.1 V - RELATIVE EFFICIENCY (NORMALIZED AT 20 mA) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 1 2 5 10 20 50 100 200 300 IPEAK - PEAK FORWARD CURRENT - mA 40 RJA = 400 C/W 30 RJA = 550 C/W 20 10 10 0 0 20 40 60 80 100 TA - AMBIENT TEMPERATURE - C 0 50 100 150 200 250 300 IPEAK - PEAK FORWARD CURRENT - mA Figure 4. Relative Efficiency vs. Peak Forward Current. Figure 5. Maximum Forward DC Current vs. Ambient Temperature. Derating Based on TJMAX = 110 C. Figure 6. Maximum Average Current vs. Peak Forward Current. 1.0 0.9 0.8 NORMALIZED INTENSITY 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 100 90 80 70 60 50 40 30 20 10 0 10 20 30 40 50 60 70 80 90 100 - ANGULAR DISPLACEMENT - DEGREES Figure 7. Normalized Luminous Intensity vs. Angular Displacement. HLMP-J105/J155. 1.0 0.9 0.8 NORMALIZED INTENSITY 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 100 90 80 70 60 50 40 30 20 10 0 10 20 30 40 50 60 70 80 90 100 ANGULAR DISPLACEMENT - DEGREES Figure 8. Normalized Luminous Intensity vs. Angular Displacement. HLMP-J100/J150. 1-127 |
Price & Availability of HLMP-J155
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |